DIGITUS CAT 8.1 S/FTP patch cable

Référence d'article: DK-1844-010
EAN: 4016032456704

CAT 8.1 S-FTP patch cord, Cu, LSZH AWG 24/7, length 1 m, color grey

The high-end network solution according to the CAT 8.1 standard

  • Reach a bandwidth of up to 2000 MHz
  • With LSZH (low smoke zero halogen) outer sheath for best fire behavior and low smoke emission
  • Transparent green colored connector with metal shielding for easy identification of Category 8.1 (2000 MHz)
  • Inner conductor: Copper (Cu)
  • PoE++ compatible

More product information



Description

The DIGITUS® Category 8.1 Class I patch cables are manufactured and tested according to the ISO/IEC 11801 and DIN EN 50173 CAT 8.1 standards. They guarantee that the cable installation complies with the ISO & EN channel specification and provide excellent performance in the DIGITUS® CAT 8.1 cabling. The performance was tested up to 2000 MHz, including performance characteristics such as near-end crosstalk (“NEXT”). The DIGITUS® patch cables were specifically designed to fully meet all requirements in various application areas. Each cable is equipped with a molded anti-kink sleeve with strain relief. In addition, the sleeve has a locking lever protection, which prevents kinking of the cables and breaking-off of the locking lever from the connector. Category 8.1 is simply identified by the green colored connectors.

Détails techniques

  • 2 x RJ45 connectors (8P8C)
  • Covers with kink protection, strain relief and locking lever protection
  • Length designation on the covers
  • Inner conductor: Copper (Cu)
  • Halogen free: yes
  • Pin assignment: 1:1
  • Category: 8.1
  • AWG cross-section: 24
  • Anti-kink sleeve: molded
  • Connector 1 type: RJ45 8(8)
  • Connector 2 type: RJ45 8(8)
  • Cable construction: 4 x 2
  • Flame retardant version: yes
  • Anti-kink sleeve color: Grey
  • Locking lever protection: yes
  • NVP value: 76
  • Oil resistant to EN 60811-404: no
  • Sheath color: Grey
  • Length: 1 m
  • Configuration: 1:1
  • Catégorie: Cat. 8.1
  • Blindage: S-FTP, blindage par feuillard et par tresse
  • Longueur: 1 m
  • Couleur: gris
  • Gaine: LSOH
  • Structure: 4x 2 AWG 24/7, paires torsadées
  • Version Slim: non
  • Flat Version: non

Contenu du paquet

  • CAT 8.1 S/FTP patch cable

Downloads and Certificates

Fiche technique

Logistique

  Quantité
(pièce)
Poids
(kg)
Profondeur
(cm)
Largeur
(cm)
Hauteur
(cm)
cm³
Carton extérieur 150 13,00 40,00 40,00 31,00 49.600,00
Carton intérieur 1 0,09 16,50 1,80 26,00 772,20
Emballage du produit 1 0,09 16,50 1,80 26,00 772,20
Numéro tarifaire des marchandises: 8544421000

Les clients qui ont acheté cet article ont également acheté

Autres accessoires
Support de profilés chapeau, 4U, 178x483x223 mm, galvanisé rail DIN inclus, profondeur et hauteur variables
N° d'art.: DN-19-DIN-4U
Câble de brassage - Cat. 6a
CAT 6A S-FTP patch cable, Cu, LSZH AWG 26/7, longueur 0,25 m, couleur noire
N° d'art.: DK-1644-A-0025/BL
Tablettes
Tablette 1U fixe p. profondeur de 400 mm ou plus 45x482x250 mm, jusqu'à 15 kg, gris (RAL 7035)
N° d'art.: DN-97609
Appareils de tests
Testeur de câbles, réseau, RJ45, BNC Appareil principal, Remote, testeur PoE, avec mallette de protection
N° d'art.: DN-14001-1
Coupleurs et adaptateurs
Coupleur modulaire CAT 6A, blindé RJ45 vers RJ45, montage sur panneau snap-in
N° d'art.: DN-93906