DIGITUS Wall Mounting Cabinet Unique Series - double sectioned, pivoted

Product number: DN-19 16-U-3
EAN: 4016032186755

16U wall mounting cabinet, Unique, 820x600x600 mm double sectioned, pivotable, grey (RAL 7035)

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany

  • Robust steel construction for sturdy wall mounting
  • Lockable safety-glass door with steel frame
  • Side panels are lockable and removable

More product information



Description

The network cabinets for wall installation from the Unique series were developed for especially convenient and flexible network cabling. Thanks to the integrated hinge in the back frame, the housing can be folded to the side if needed, for example in order to easily carry out assembly work in the back area of the cabinet. There is a sliding cable inlet with foam rubber seal in the roof of each cabinet. The back wall and floor plate are equipped with pre-cut cable inlets with a plastic cover. In addition, the back frame is equipped with brush management panels on the top and bottom. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. One pair of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. The back frame also has a 483 mm (19”) perforation. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable and lockable side walls in a modular design as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The housing frame plate is bolted on the wall to open in either direction and then connected with the housing. With optionally available levelling feet or casters, the wall housings from the Unique series can also be used as a free-standing unit.

Technical details

  • Safety class rating IP20
  • Lockable safety-glass door with steel frame
  • 210° door opening angle
  • Housing is connected to rear frame with separate locking mechanism (incl. individual key)
  • 102° pivotable angle of the housing from the frame
  • 1-point-locking-mechanism on the front door
  • Side panels are lockable and removable
  • 483 mm (19“) profile rails mounted on the front side inside of the cabinet, galvanized
  • 483 mm (19“) profile rails are adjustable in depth and with height unit marking
  • Rear frame with 483 mm (19”) punch outs
  • Max. installation depth: 440 mm
  • Cable entry on the rear side and base with plastic cover and top with sliding cover
  • Rear frame with brush strip for cable entry on top and base
  • Roof is prepared for fan units (punched out entries)
  • Ventilation slots for active and passive ventilation and exhausting
  • Several earthing points for rack components
  • Incl. installation set (screws, cage nuts, washers)
  • Rack is completely mounted
  • Equipment mounting depth min.-max.: 375-440 mm
  • Cabinet type: Wall mounting cabinet
  • Color: light grey, RAL 7035
  • Depth: 600 mm
  • Front door: Glass door, single opening
  • Load capacity: 80 kg
  • Side panels: Both sides
  • Units: 16
  • Width: 600 mm
  • IP protection class: IP20
  • Mounted: yes

Package content

  • Earthing wire set
  • Installation set (screws, cage nuts, washers)
  • 2 x Keys

Logistics

  Number
(pcs)
Weight
(kg)
Depth
(cm)
Width
(cm)
Height
(cm)
cm³
Packaging Unit Carton 1 51,80 65,00 65,00 87,00 367.575,00
Packaging Unit Inside 1 51,80 65,00 65,00 87,00 367.575,00
Packaging Unit Single 1 51,80 65,00 65,00 87,00 367.575,00
Customs tariff number: 9403208000

Customers who bought this product also bought

Shelves
1U extendible shelf for 600 mm depth racks 40x485x368 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-19 TRAY-2-600
2U fixed shelf for racks from 800 mm depth 88,5x482x552 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-19 TRAY-2-55
Cable Management
1U cable management ring, 44x60 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-1
1U cable brush management panel, 44x483x11 mm brush size 27x423 mm, color grey (RAL 7035)
Item No.: DN-97660
Further Accessories
Potential equalisation bar, 220 mm 6 connection points, incl. earthing leads
Item No.: DN-19 EARTH

Accessories

Basic
1U Aluminum PDU, rackmountable, 8x CEE 7/7 outlet 10A Plug, 250VAC 50/60Hz, IEC C14 plug, pre-fuse
Item No.: DN-95410
1U Aluminum PDU, rackmountable, 7x safety outlet 16A, 4000W, 250VAC 50/60Hz, switch
Item No.: DN-95402
1U Aluminum PDU, rackmountable, 7x safety outlet 16A, 4000W, 250VAC 50/60Hz, overload protection
Item No.: DN-95403
1U Aluminum PDU, rackmountable 10A, 2500W, 250VAC 50/60Hz, overl-prot.,1xC14
Item No.: DN-95404
1U Aluminum PDU, rackmountable, 7x safety outlet 16A Plug, 250VAC 50/60Hz, switch, surge Protection
Item No.: DN-95407
1U Aluminum PDU, rackmountable, 8x safety outlet 16A, 4000W, 250VAC 50/60Hz,
Item No.: DN-95401
Shelves
2U fixed shelf for racks from 450 mm depth 88,5x483x352 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-97610
1U fixed shelf for racks from 400 mm depth 45x482x250 mm, up to 15 kg, grey (RAL 7035)
Item No.: DN-97609
2U extendib. shelf for cabinets from 450 mm depth 88x483x352 mm, up to 30 kg, grey (RAL 7035)
Item No.: DN-19-TRAY-2-450
Fan Units
Roof vent. unit, wall mounting cabinets 2 fans, thermostat, switch, grey (RAL 7035)
Item No.: DN-19 FAN-2-WM-T
Ventilation unit for 483 mm (19") installation 2 fans, thermostat, switch, grey (RAL 7035)
Item No.: DN-19 FAN-2-HO
Drawers
1U lockable drawer with handle 44x481x400 mm, color grey (RAL 7035)
Item No.: DN-19 KEY-1U
3U lockable drawer with handle 132x481x400 mm, color grey (RAL 7035)
Item No.: DN-19 KEY-3U
2U lockable drawer with handle 88x481x400 mm, color grey (RAL 7035)
Item No.: DN-19 KEY-2U
Further Accessories
Castors for standard wall mounting cabinets Unique set with 4 pieces, 2 pieces with brake system
Item No.: DN-19 CASTOR-WM
M6 installation screw set, 50 pieces 50x black screws, cage nuts and washers
Item No.: DN-19 SET
M6 installation screw set, 50 pieces 50x silver screws, cage nuts and washers
Item No.: DN-19 SET-S
LED lighting with IR sensors, with magnetic strip including power adapter
Item No.: DN-19 LIGHT-3
Potential equalisation bar, 220 mm 6 connection points, incl. earthing leads
Item No.: DN-19 EARTH
Cable Management
1U cable management panel with brush entries 4x aluminum cable rings 44x60 mm, grey (RAL 7035)
Item No.: DN-97662
2U cable management panel 5x cable rings 85x60 mm, color grey (RAL 7035)
Item No.: DN-19 ORG-2U
1U cable management panel with 30x400 mm brush 480x120 mm cable fixing tray, grey (RAL 7035)
Item No.: DN-19 ORG-3U
2U cable management ring, 44x100 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-2
1U cable management panel 5x cable rings 40x60 mm, color grey (RAL 7035)
Item No.: DN-97601
1U cable brush management panel, 44x483x11 mm brush size 27x423 mm, color grey (RAL 7035)
Item No.: DN-97660
1U cable management cage detachable rear plate, 44x483x68 mm, grey
Item No.: DN-97616
1U cable management ring, 44x60 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-1
Hook and loop tape, 20 mm wide for structured cabling, 10 m roll, color black
Item No.: DN-CT-10M-20
Blanking Panels
1U blank panel color grey (RAL 7035)
Item No.: DN-19 BPN-01
2U blank panel color grey (RAL 7035)
Item No.: DN-19 BPN-02
Spare Parts and Doors
Levelling feet for network- and server cabinets adjustable height, 4 pieces
Item No.: DN-19 FEET
Fan replacement for fan units 138 m³/h air circulation, 47 dB/m noise level
Item No.: DN-19 FAN
Key for NW a. SRV Unique a. Dynamic, WM Slim 1 piece, type 9473
Item No.: DN-19 KEY-9473