DIGITUS Industrial network cabinet, indoor use, IP55

Product number: DN-19 42U-I-8/10-1
EAN: 4016032371052

42U network rack indoor IP55 2100x800x1000, incl. plinth, grey (RAL 7035)

  • Protection class IP55 against water and dust ingress in accordance with IEC EN60529
  • IK10 impact resistance tested in accordance with IEC EN62262
  • 4-point locking of the front and rear door
  • incl. mounted base

More product information



Description

The free-standing industrial network enclosures are specially adapted to the requirements of harsh environments in accordance with protection class IP55. The base chassis can be opened modularly thanks to its galvanized, screw-fastened panels. It is also equipped with a slide-on cable inlet with a foam rubber seal and PG cable glands. A plinth (100 mm) mounted under the enclosure provides more storage space for excess cable lengths. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 2.0 mm thick. All-round profile perforation supports a wide range of installation options in the cabinet. The coloring takes the form of electrostatic powder coating in the standard color grey (RAL 7035). The adhesion according to EN ISO 2409: Class 0 to 1 and the 500-hour salt spray resistance test confirm a possible operating temperature of -25 °C to + 70 °C. The removable side panels, fastened with countersunk screws, and doors including swivel handle with profile half cylinder, improve the safety of accessibility.

Technical details

  • Front door made entirely of metal frame and 4 mm thick tempered glass
  • Closed steel rear door with filtered air inlet (250x250 mm)
  • Door structure made of multi-bent material ensures rigidity and strength
  • Special sealing system between metal and profile system made of PUR (polyurethane)
  • Side panels with special fastening via countersunk screw
  • 130° door opening angle
  • 1.5 - 2.0 mm thick sheet steel
  • Corner connectors made of E-160 material processed with aluminum spray technology, highly resistant to rusting
  • Circumferential profile perforation structure on the inside
  • 483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized
  • 483 mm (19") profile rails are adjustable in depth and marked with the height unit
  • Floor chassis equipped with slide-on cable inlet & PG cable inlets (1x PG 48, 4x PG 21)
  • Frame profiles manufactured with DIN EN10142-2000 DX51 D+Z material, which offers high resistance to rust
  • Roof with screwed privacy screen in front of eyebolts
  • Installation depth for components min.-max.: 160-860 mm
  • Height including base, transport eyelets, mudguard: 2159 mm
  • Cabinet type: Industrial cabinet
  • Color: light grey, RAL 7035
  • Depth: 1000 mm
  • Front door: Glass door, single opening
  • Load capacity: 1500 kg
  • Units: 42
  • Width: 800 mm
  • IP protection class: IP55
  • Mounted: yes

Package content

  • Earthing cable set
  • Installation set (screws, cage nuts, washers)
  • 2x key

Downloads and Certificates

Logistics

  Number
(pcs)
Weight
(kg)
Depth
(cm)
Width
(cm)
Height
(cm)
cm³
Packaging Unit Carton 1 176,00 105,00 85,00 215,00 1.918.875,00
Packaging Unit Inside 1 176,00 105,00 85,00 215,00 1.918.875,00
Packaging Unit Single 1 176,00 105,00 85,00 215,00 1.918.875,00
Customs tariff number: 9403208000

Accessories

Further Accessories
Slide rails, L shape, for 600-800 mm depth racks adjustable 350-600 mm depth, set with 2 pieces
Item No.: DN-19 GS-NW
LED lighting with IR sensors, with magnetic strip including power adapter
Item No.: DN-19 LIGHT-3
M6 installation screw set, 50 pieces 50x black screws, cage nuts and washers
Item No.: DN-19 SET
Potential equalisation bar, 220 mm 6 connection points, incl. earthing leads
Item No.: DN-19 EARTH
M6 installation screw set, 50 pieces 50x silver screws, cage nuts and washers
Item No.: DN-19 SET-S
Basic
Aluminium PDU, Rackmountable, frequency filter 16A, 3600W, 230VAC 50/60Hz, 7x safety, 2m
Item No.: DN-95412
Aluminum PDU, rackmountable, 12x safety outlet 2x 16A, 250VAC 50/60Hz, overload protection
Item No.: DN-95405
1U Aluminum PDU, rackmountable 10A, 2500W, 250VAC 50/60Hz, overl-prot.,1xC14
Item No.: DN-95404
1U Aluminum PDU, rackmountable, 8x safety outlet 16A, 4000W, 250VAC 50/60Hz,
Item No.: DN-95401
1U Aluminum PDU, rackmountable, 7x safety outlet 16A, 4000W, 250VAC 50/60Hz, switch
Item No.: DN-95402
18 way outlet strip - 42U in length vertical dual circuit, aluminum, 2x 16 A, circuit breaker
Item No.: A-19-STRIP42-1
1U Aluminum PDU, rackmountable, 8x red CEE 7/7 10A Plug, 250VAC 50/60Hz, outlet
Item No.: DN-95410-R
1U Aluminum PDU, rackmountable, 7x safety outlet 16A Plug, 250VAC 50/60Hz, switch, surge Protection
Item No.: DN-95407
1U Aluminum PDU, rackmountable, 7x safety outlet 16A, 4000W, 250VAC 50/60Hz, overload protection
Item No.: DN-95403
1U Aluminum PDU, rackmountable, 8x CEE 7/7 outlet 10A Plug, 250VAC 50/60Hz, IEC C14 plug, pre-fuse
Item No.: DN-95410
Cable Management
Hook and loop tape, 20 mm wide for structured cabling, 10 m roll, color black
Item No.: DN-CT-10M-20
1U cable management panel 5x cable rings 40x60 mm, color grey (RAL 7035)
Item No.: DN-97601
1U cable management panel with brush entries 4x aluminum cable rings 44x60 mm, grey (RAL 7035)
Item No.: DN-97662
2U cable management ring, 44x100 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-2
3U cable management ring, 45x150 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-3-1
1U cable brush management panel, 44x483x11 mm brush size 27x423 mm, color grey (RAL 7035)
Item No.: DN-97660
1U cable management cage detachable rear plate, 44x483x68 mm, grey
Item No.: DN-97616
2U cable management panel 5x cable rings 85x60 mm, color grey (RAL 7035)
Item No.: DN-19 ORG-2U
1U cable management panel with 30x400 mm brush 480x120 mm cable fixing tray, grey (RAL 7035)
Item No.: DN-19 ORG-3U
1U cable management ring, 44x60 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-1
Shelves
2U extendib. shelf for cabinets from 450 mm depth 88x483x352 mm, up to 30 kg, grey (RAL 7035)
Item No.: DN-19-TRAY-2-450
1U fixed shelf for racks from 1000 mm depth 44x483x737 mm, up to 100 kg, grey (RAL 7035)
Item No.: DN-19 TRAY-1-1000
1U fixed shelf for racks from 400 mm depth 45x482x250 mm, up to 15 kg, grey (RAL 7035)
Item No.: DN-97609
1U fixed shelf for racks from 600 mm depth 44x482x400 mm, up to 15 kg, grey (RAL 7035)
Item No.: DN-97614
2U fixed shelf for racks from 450 mm depth 88,5x483x352 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-97610
2U fixed shelf for racks from 800 mm depth 88,5x482x552 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-19 TRAY-2-55
1U fixed shelf for 600 mm depth racks 44x483x358 mm, adjust. 350-550 mm depth, grey
Item No.: DN-97644
1U extendible shelf for 1000 mm depth racks 44x483x720 mm, up to 65 kg, grey (RAL 7035)
Item No.: DN-19 TRAY-2-1000
1U fixed shelf for 1000 mm depth racks 43x484x708 mm, adjust. up to 900 mm depth, grey
Item No.: DN-97648
Blanking Panels
1U blank panel color grey (RAL 7035)
Item No.: DN-19 BPN-01
2U blank panel color grey (RAL 7035)
Item No.: DN-19 BPN-02
Spare Parts and Doors
Key for IP55 wall mounting and free standing cabinets, key number 333
Item No.: DN-19 KEY-EK333