DIGITUS Industrial Network Cabinet, Indoor, IP55

Product number: DN-19 24U-I-6/8-1
EAN: 4016032371533

24U network rack, indoor IP55 1300x600x800 mm, incl. plinth, grey (RAL 7035)

  • Safety class IP55 against dust & water ingress acc. to IEC EN60529
  • IK10 mechanical impact resistance acc. to IEC EN62262
  • 4 point locking system on front- & rear door
  • incl. already mounted plinth

More product information



Description

The free-standing industrial network cabinets are specially adapted according to protection type IP55 for the requirements of harsh environments. The floor structure can be opened in a modular design thanks to its galvanized, bolted panels. In addition, it is equipped with a sliding cable inlet with foam rubber seal as well as PG cable glands. A plinth mounted under the cabinet (100 mm) provides extra storage room for excess cable lengths. Two pairs of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth is adjustable and they are connected to additional depth bars in the cabinet. Each cabinet is made of up to 2.0 mm thick sheet steel. A wraparound profile perforation supports a wide range of installation options in the cabinet. Coloring is done with electrostatic powder coating in the standard color gray (RAL 7035). The adhesion capacity according to EN ISO 2409: Class 0 to 1 as well as the 500-hour test carried out for resistance against salt spray, demonstrates a permissible operating temperature from - 25 °C up to + 70 °C. The removable side walls, fastened with countersunk screws, as well as doors including swing handle with profile half-cylinder, improve the security of access.

Technical details

  • Front door with complete metal frame and 4 mm strong tempered glass
  • Closed steel rear door with filtered air inlet (250x250 mm)
  • Door structure is produced with multiple bending to obtain rigidity and strength
  • Special gasketing system between metal frame and profile system made out of PUR (Polyurethane)
  • Side panels with special fixing via countersunk bolt
  • 130° door opening angle
  • 1.5 - 2.0 mm strong steel sheet
  • Corner parts made out of E-160 material with aluminum injection molding, high resistance against corrosion
  • Profile hole structure rotary inside
  • 483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
  • 483 mm (19“) profile rails are adjustable in depth and with height unit marking
  • Base chassis is equipped with sliding cable entry mechanism & PG cable entries (1x PG 48, 4x PG 21)
  • Profiles produced with DIN EN10142-2000 DX51 D+Z material provide high resistance against corrosion
  • Roof with screwed visual cover panel for lifting eye bolts
  • Equipment mounting depth min.-max.: 160-660 mm
  • Cabinet type: Industrial cabinet
  • Color: light grey, RAL 7035
  • Depth: 800 mm
  • Front door: Glass door, single opening
  • Load capacity: 1500 kg
  • Units: 24
  • Width: 600 mm
  • IP protection class: IP55
  • Mounted: yes

Package content

  • Earthing wire set
  • Installation set (screws, cage nuts, washers)
  • 2x Keys

Downloads and Certificates

Logistics

  Number
(pcs)
Weight
(kg)
Depth
(cm)
Width
(cm)
Height
(cm)
cm³
Packaging Unit Carton 1 96,00 85,00 65,00 135,00 745.875,00
Packaging Unit Inside 1 96,00 85,00 65,00 135,00 745.875,00
Packaging Unit Single 1 96,00 85,00 65,00 135,00 745.875,00
Customs tariff number: 9403208000

Accessories

Spare Parts and Doors
Key for IP55 wall mounting and free standing cabinets, key number 333
Item No.: DN-19 KEY-EK333
Levelling feet for network- and server cabinets adjustable height, 4 pieces
Item No.: DN-19 FEET
Shelves
1U fixed shelf for 800 mm depth racks 43x484x508 mm, adjust. up to 700 mm depth, grey
Item No.: DN-97646
1U extendible shelf for 800 mm depth racks 40x484x568 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-19 TRAY-2-800
1U fixed shelf for racks from 400 mm depth 45x482x250 mm, up to 15 kg, grey (RAL 7035)
Item No.: DN-97609
1U fixed shelf for 600 mm depth racks 44x483x358 mm, adjust. 350-550 mm depth, grey
Item No.: DN-97644
2U fixed shelf for racks from 800 mm depth 88,5x482x552 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-19 TRAY-2-55
2U extendib. shelf for cabinets from 450 mm depth 88x483x352 mm, up to 30 kg, grey (RAL 7035)
Item No.: DN-19-TRAY-2-450
1U fixed shelf for racks from 600 mm depth 44x482x400 mm, up to 15 kg, grey (RAL 7035)
Item No.: DN-97614
2U fixed shelf for racks from 450 mm depth 88,5x483x352 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-97610
1U extendible shelf for 600 mm depth racks 40x485x368 mm, up to 25 kg, grey (RAL 7035)
Item No.: DN-19 TRAY-2-600
Basic
1U Aluminum PDU, rackmountable, 8x safety outlet 16A, 4000W, 250VAC 50/60Hz,
Item No.: DN-95401
1U Aluminum PDU, rackmountable, 7x safety outlet 16A, 4000W, 250VAC 50/60Hz, overload protection
Item No.: DN-95403
1U Aluminum PDU, rackmountable 10A, 2500W, 250VAC 50/60Hz, overl-prot.,1xC14
Item No.: DN-95404
1U Aluminum PDU, rackmountable, 8x red CEE 7/7 10A Plug, 250VAC 50/60Hz, outlet
Item No.: DN-95410-R
1U Aluminum PDU, rackmountable, 7x safety outlet 16A, 4000W, 250VAC 50/60Hz, switch
Item No.: DN-95402
1U Aluminum PDU, rackmountable, 7x safety outlet 16A Plug, 250VAC 50/60Hz, switch, surge Protection
Item No.: DN-95407
1U Aluminum PDU, rackmountable, 8x CEE 7/7 outlet 10A Plug, 250VAC 50/60Hz, IEC C14 plug, pre-fuse
Item No.: DN-95410
Aluminum PDU, rackmountable, 12x safety outlet 2x 16A, 250VAC 50/60Hz, overload protection
Item No.: DN-95405
18 way outlet strip - 42U in length vertical dual circuit, aluminum, 2x 16 A, circuit breaker
Item No.: A-19-STRIP42-1
Aluminium PDU, Rackmountable, frequency filter 16A, 3600W, 230VAC 50/60Hz, 7x safety, 2m
Item No.: DN-95412
Blanking Panels
1U blank panel color grey (RAL 7035)
Item No.: DN-19 BPN-01
2U blank panel color grey (RAL 7035)
Item No.: DN-19 BPN-02
Drawers
3U lockable drawer with handle 132x481x400 mm, color grey (RAL 7035)
Item No.: DN-19 KEY-3U
2U lockable drawer with handle 88x481x400 mm, color grey (RAL 7035)
Item No.: DN-19 KEY-2U
1U lockable drawer with handle 44x481x400 mm, color grey (RAL 7035)
Item No.: DN-19 KEY-1U
Cable Management
1U cable management panel with 30x400 mm brush 480x120 mm cable fixing tray, grey (RAL 7035)
Item No.: DN-19 ORG-3U
1U cable brush management panel, 44x483x11 mm brush size 27x423 mm, color grey (RAL 7035)
Item No.: DN-97660
1U cable management panel with brush entries 4x aluminum cable rings 44x60 mm, grey (RAL 7035)
Item No.: DN-97662
1U cable management cage detachable rear plate, 44x483x68 mm, grey
Item No.: DN-97616
2U cable management panel 5x cable rings 85x60 mm, color grey (RAL 7035)
Item No.: DN-19 ORG-2U
2U cable management ring, 44x100 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-2
Hook and loop tape, 20 mm wide for structured cabling, 10 m roll, color black
Item No.: DN-CT-10M-20
1U cable management ring, 44x60 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-1
1U cable management panel 5x cable rings 40x60 mm, color grey (RAL 7035)
Item No.: DN-97601
3U cable management ring, 45x150 mm 10 pieces, color grey (RAL 7035)
Item No.: DN-19 ORG-3-1
Further Accessories
M6 installation screw set, 50 pieces 50x black screws, cage nuts and washers
Item No.: DN-19 SET
LED lighting with IR sensors, with magnetic strip including power adapter
Item No.: DN-19 LIGHT-3
Slide rails, L shape, for 600-800 mm depth racks adjustable 350-600 mm depth, set with 2 pieces
Item No.: DN-19 GS-NW
Potential equalisation bar, 220 mm 6 connection points, incl. earthing leads
Item No.: DN-19 EARTH
Castors for open racks and IP55 network racks set with 4 pieces, 2 pieces with brake system
Item No.: DN-19 CASTOR-OR
M6 installation screw set, 50 pieces 50x silver screws, cage nuts and washers
Item No.: DN-19 SET-S